Bespoke Octadecanamide CAS 124-26-5 With Best Services

  • Payment: L/C,T/T,D/P,Paypal,Money Gram,Western Union
  • Incoterm: FOB,CFR,CIF,EXW,FCA,CPT,CIP
  • Min: 10 Gram
  • Delivery: 7 Days
  • Transporta: Ocean, Land,Air, DHL,TNT
  • Port: Shanghai Port, Qingdao Port

Name: Octadecanamide

Cas: 124-26-5

Purity: 99%

MOQ: 1KG

Directory Guidance on Octadecanamide

Chemical Structure

Octadecanamide

Basic Info

Octadacanamide appears as a solid that is colorless or yellowish. It is not soluble in water, but it has a very high solubility with non-polar solvents. The product is environmentally friendly, non-toxic and pollution-free. The product is easily dispersed in water due to its ultrafine particles, low viscosity and good dispersibility.

Octadacanamide appears as a pale yellow or white powder. It becomes colorless crystals after recrystallization with ethanol. It is soluble in chloroform and ether in hot ethanol. Insoluble in colder ethanol and water. Relative density is 0.96, melting temperature 108.5-109, and boiling temperature 250 (1599.86Pa). Octadacanamide is less lubricious than grease, and has a shorter duration. Thermal stability is poor, and the initial coloration can be a problem. The above disadvantages can be overcome by combining with a small quantity of higher alcohols.

Stearamide is used in many different ways. Octadacanamide can be found in many lubricants and release agents.

Octadecanamide can be prepared by acylation. The most common method involves reacting stearyl with chlorinated acids to obtain stearic chloride. This chloride then reacts ammonia with stearamide. To obtain high-purity product, it’s important to carefully control the temperature of the reaction and the solvent used.

Product Introduction

Octadecanamide Chemical Properties
Melting point 98-102 °C(lit.)
Boiling point 250-251 °C12 mm Hg(lit.)
density 0.9271 (rough estimate)
vapor pressure 0Pa at 25℃
refractive index 1.432-1.434
storage temp. Refrigerator
solubility Chloroform (Slightly, Sonicated), Methanol (Slightly)
pka16.61±0.40(Predicted)
form A solid
color White
Water Solubility 102μg/L at 20℃
BRN 909006
LogP6.7
CAS DataBase Reference124-26-5(CAS DataBase Reference)

Product Packaging

Octadecanamide

Usage 1

Octadecanamide can be used to lubricate and release plastics such as polyvinylchloride, polyphenylene or urea-formaldehyde resin. It is a good external lubricant and has excellent release properties. Also, it has excellent electrical insulation and transparency. In general, 0.3 to 0.8 parts of Octadacanamide are used for transparent hard extrusion molding. This product’s lubricity is inferior to stearic acids.

The initial color properties, thermal instability, and short-term effect are all disadvantages. The above disadvantages can be overcome by combining with a small quantity of higher alcohols. The resin can precipitate if the amount is too high. This will affect the product’s printability and transparency. This product is also used as an anti-adhesion agent and lubricant for polyolefins. Octadecanamide is also used as a lubricant and internal release agent for rubbers, both natural and synthetic. This improves the processingability of rubber. Enhance the dispersion of pigments and additives to give the product a nice luster. Octadacanamide can be used to emulsify oil-based drilling fluids or as a lubricant in metal wire drawing.

Usage 2

Octadecanamide is a commercially available product that contains palmamide. Palmamide is non-hygroscopic, and it has a good level of smoothness. It has the ability to stabilize paraffin wax and improve pigment and dye dispersion. It also has excellent weeping, sliding, and demoulding properties. Octadecanamide is used as a rubber compounding agent and pigment ink compounding agent. It can also be used to release molds, lubricate vinyl chloride resin and urea-formaldehyde, and stabilize lotions.

Usage 3

Octadecanamide can be used to lubricate and release plastics like PVC, polyolefin and polystyrene.

Usage 4

Octadacanamide has excellent external lubrication properties and is used to release plastics like polyvinylchloride and polystyrene.

Octadacanamide can be used to make polyolefin film anti-adhesive, in conjunction with oleic amide and erucic amide. Octadacanamide is a better anti-adhesive agent than the inorganic agents commonly used (silica) because it does not affect the product’s transparency.

Octadecanamide can be used to improve rubber processing by adding gloss and improving the release of synthetic or natural rubber.

Related References

Wikipedia-Octadecanamide

Manufacturer of Octadecanamide

Company Info

China Lookchemical is a professional enterprise that integrates research and development, production, and sales of new chemicals. The company was the first to specialize in providing organic intermediates. After several years of continuous efforts, especially in the fields of surfactants, feed additives, plant extracts, pesticides, industrial chemicals, etc., significant breakthroughs have been made.
 
The company adheres to the concept of “integrity management, strict quality control, customer first” and has received unanimous praise from customers at home and abroad.

At the same time, we can also provide customers with excellent transportation services. Adhere to customer centricity and integrity as the source of development, and gradually improve the company’s various systems. We are high-quality management personnel who have been engaged in chemical trade for many years, with a modern market management philosophy, and constantly explore customer market demands using flexible methods.

Cooperation Partner

Previous
Next

Hot Products

Scroll to Top